Main Structure Features
■ High rigidity body frame, to be capable of huge impact, with reliable accuracy.
■ Large off center load endurance, and side forece being absorbed inside.
■ Double cylinder independent type transient overload orotection.to keep mould and machine from damaging.
■ Powerful function.being capable of mating all kinds of automatic device
■ Electronic angle display the position of crank shaft.with beautiful look
■ High-precision six-face alloy guide-rail
■ Super-long guide-rail to improve the capcity of countering side load The side force is abbosbed directly by machine body.The guide-rail is with good stability.
■ Optimal struction of force application
■ Reverse involution design
■ Side force being eliminated inside To strengthen the capacity of off center Genter load proof
■ Stable run and reliable precision
* Provide Customized Personalized Service
Name | Tons | YC2-110 | YC2-160 | YC2-200 | YC2-250 | ||||||||
Model | mm | S | V | H | S | V | H | S | V | H | S | V | H |
Capability | mm | 110 | 160 | 200 | 250 | ||||||||
Rated Force | S.P.M | 5 | 3 | 6 | 3 | 6 | 3 | 7 | 3.5 | ||||
Slide Stroke | mm | 180 | 110 | 200 | 130 | 250 | 150 | 280 | 170 | ||||
Stroke Length | 5kg/cm² | 50 | 35-65 | 50-100 | 40 | 30-55 | 40-85 | 35 | 25-45 | 35-70 | 30 | 20-35 | 30-60 |
Maximum Die Height | mm | 400 | 450 | 500 | 550 | ||||||||
Maximum Upper Die Weight | mm | 800kg | 1270kg | 1470kg | 1560kg | ||||||||
Die Height Adjustment | mm | 100 | 100 | 120 | 120 | ||||||||
Slider Area | mm | 1800x650 | 2000x760 | 2400x840 | 2700x900 | ||||||||
Bolster Area | mm | 130 | 165 | 150 | 185 | 170 | 220 | 170 | 225 | ||||
Bolster Thickness | mm | 1450x500 | 1600x550 | 1850x650 | 2100x700 | ||||||||
Slider Thickness | mm | 70 | 70 | 95 | 95 | ||||||||
Slider Hole | mm | Φ5x3xPitch 320 | Φ5x3xPitch 350 | Φ5x3xPitch 375 | Φ5x3xPitch 450 | ||||||||
Main Motor | HPxP | 10x6 | VFD15X4 | 15x6 | VFD20X4 | 20x6 | VFD25X4 | 25x6 | VFD30X4 | ||||
Slider Motor | HPxP | 1x4 | 1x4 | 2x4 | 2x4 | ||||||||
Air Pressure Given | kg/cm² | 5 | 5 | 5 | 5 | ||||||||
Precision | - | JIS(CNS) | |||||||||||
Die Cushion | - | 2-Pad-2-Cylider | |||||||||||
Die Cushion Model | - | D2-240-70 | D3-300-70 | D5-400-80 | D6-400-100 | ||||||||
Die Cushion Capability | Tons | 3.6X2 | 6.3x2 | 10x2 | 14x2 | ||||||||
Die Cushion Air Pressure | kg/cm² | 6.5 | 7.2 | 6.75 | 9 | ||||||||
Die Cushion Stroke | - | 70 | 70 | 80 | 100 | ||||||||
Die Cushion Crown Area | mm² | 350X235X2 Group | 410X260X2 Group | 540X350X2 Group | 640X470X2 Group |